Severe Conditions Maintenance Operating Condition Required Maintenance Mud, Water, Rain 1. Check for loose fittings, obvious damage to the machine, or any fluid leakage. 2. After completing operations, clean mud, rocks, or debris from the machine. Inspect for damage, cracked welds, or loosened parts. 3. Perform all daily lubrication and service. 4. If the machine was working in salt water or other corrosive materials, be sure to flush the equipment with fresh water. Extremely Dusty or 1. Clean the engine air filter on a more frequent basis. Hot Environment 2. Clean the radiator and oil cooler fins to remove dirt and dust. 3.
Clean the fuel system intake strainer and fuel filter more frequently. 4. Inspect the starter motor and alternator, and clean as often as necessary. Rocky Terrain 1. Check the wheels, tires, rims, and valve stems for damage or excessive wear. 2. Inspect for loose or damaged fittings and bolts. 3. On a more frequent basis, inspect the bucket and boom for damage or excessive wear. 4. Install a top guard and front guard as necessary for protection against falling rock. Extreme Cold 1. Use the proper grade of fuel for cold temperatures. 2. Use a gauge to check the antifreeze to be sure that it will provide protection for the coldest temperature expected. 3.
Use a hydrometer to check the condition of the batteries. In extremely cold weather, remove the batteries at night and store them in a warm area. 3-20 INSPECTION, MAINTENANCE AND ADJUSTMENT MEGA 300-III Shop Manual