1. C5 Relief Cartridge 2. C7 Decompression Cartridge FIGURE 3-47 2870 3. Unscrew the plug and remove the plug and washer. Adjust the screw that is located beneath the plug. Turn the screw clockwise to raise relief pressure. Turn the screw counter- clockwise to lower the relief pressure. FIGURE 3-48 2849 4. Install the plug and washer after pressure has been adjusted. 3. Loosen the locknut on the C7 adjusting screw. Turn the adjusting screw clockwise to raise the relief pressure. Turn the adjusting screw counterclockwise to lower the relief pressure. Brake Charge Pressure 1. Attach gauge to Port 3. See Figure 3-45. 2. Adjust the C5 relief cartridge (1) on the brake pilot valve.
See Figure 3-48. Relief pressure for unloading is 140 kg/cm 2 (1,991 psi). Relief pressure for loading is 120 kg/cm 2 (1,707 psi). 4. Tighten the locknut after the adjustment has been made. Unloader Valve Pressure 1. Attach gauge to Port TPS on the unloader valve. See Figure 3-49. 3. Loosen the locknut on the C5 adjusting screw. Rotating the adjusting screw clockwise will raise the relief pressure. Rotating the adjusting screw counterclockwise will lower the relief pressure. 4. Tighten the locknut after the adjustment has been made. Control Lever Activation Pressure 1. Attach gauge to Port 4. See Figure 3-45. 2. Adjust the C7 decompression cartridge (2) on the brake pilot valve.
See Figure 3-48. Relief pressure should be set at 32 kg/cm 2 +3 (455 psi). +43 FIGURE 3-49 2850 MEGA 300-III Shop Manual INSPECTION, MAINTENANCE AND ADJUSTMENT 3-23