daewoo — Daewoo Wheel Loader Shop Manual

3. Pry the spring clip loose from the solenoid cover. See Figure 4-54. Remove the cover and O-ring. 6. On the opposite side of the valve, remove the bolts that hold the cover to the valve housing. See Figure 4-57. Exercise caution because the cover is being acted on by spring pressure. FIGURE 4-54 4493 4. Unplug the wires from the solenoids. See Figure 4-55. Remove the bolts from the sole- noids. Remove the solenoids. FIGURE 4-57 4496 7. Remove all spools and springs from their bores. See Figure 4-58. Mark the spools and bores so that the spools can be returned to the bores that they were removed from. FIGURE 4-55 4494 5. Remove the detent blocks, springs, and spools from the valve bores.

See Figure 4-56. Mark the spools, blocks, and bores so that the parts can be returned to the bores that they were removed from. FIGURE 4-58 4497 8. Remove the stop plates and detent blocks from the valve body. See Figure 4-59. FIGURE 4-56 4495 FIGURE 4-59 4498 Mega 300-III Shop Manual TORQUE CONVERTER AND TRANSMISSION 4-19