8. Apply Loctite to the bore plugs and install them. See Figure 4-161. FIGURE 4-162 4600 FIGURE 4-165 4603 9. Slide the output flange onto the splines of the output shaft. See Figure 4-162. FIGURE 4-163 4601 FIGURE 4-166 4604 FIGURE 4-164 4602 10. Apply a non hardening sealant to the flange disc. Install the bolts through the disc and tighten to 49 Nm (36 ft lb). See Figure 4-163. FIGURE 4-167 4605 11. Install the bolt lock plate. See Figure 4-164. Mega 300-III Shop Manual TORQUE CONVERTER AND TRANSMISSION 4-45