24. SERVICE PROCEDURE 24.11.2.5.2 Maintenance Proper battery maintenance will assure maximum service. Following are a few simple rules: + Keep battery cable terminals clean and tight. + Keep filler cap vent holes unplugged. + Replace worn, cracked, broken or corroded cables. + Keep battery fastened securely in frame. REMARK Excessive tightening can warp or crack battery case. + Maintain the correct battery liquid level. (Conventional battery only). + Always charge the battery in a ventilated area. 4 Keep the battery clean. The following precautions must be taken when working around batteries: Use a battery carrier to avoid spilling electrolyte on clothing.
Wearing rubber aprons and gloves is advisable. Be careful that tools or other metallic objects do not fall across the battery terminals. Never break a live circuit at the terminals. This could cause sparks. Make sure charger cable clamps or booster leads are clean and making good contact. If it becomes necessary to prepare electrolyte of a desired specific gravity, always pour the acid into the water. Always turn the charger to the OFF position before connecting or removing charger leads to the battery. When charging a battery, it is recommended that the vent caps be left on. A damp cloth should be-placed on top of the vent caps.
24.11.2.5.3 Cleaning the Battery A WARNING Battery acid causes severe burns. Avoid contact with eyes, skin, or clothing. Wear goggles, rubber gloves, and apron. If eye contact occurs, flush with water for 15 minutes and get prompt medical attention. If skin contact occurs, flush with soap and water. 3-59