. MAINTENANCE OUTLINE OF SERVICE HANDLING AND PERFORMANCE OF OIL CLINIC FOR OIL, FUEL, COOLANT OIL The engine and hydraulic equipment are used under extremely severe conditions (high temperature, high-pressure), so the oil deteriorates as time passes. Always use the recommended oil in the list given in the Operation and Maintenance Manual that matches the grade, maximum temperature, and minimum temperature. Even if the oil is not dirty, always change the oil at the specified interval. Oil corresponds to blood in the human body, always be careful when handling it to prevent any impurities (water, metal particles, dirt, etc.) from getting in.
The majority of problems with the machine are caused by the entry of such impurities. Take particular care not to let any impurities get in when storing or adding oil. Never mix oils of different grades or brands. Always add the specified amount of oil. Having too much oil or too little oil are both causes of problems. If the oil in the hydraulic equipment becomes cloudy, there is probably water or air inside the circuit. Please consult your Komatsu distributor. When changing the oil, always replace the related filters at the same time. We recommend you to have an analysis made of the oil periodically to check the condition of the machine.
For those who wish to use this service, please contact your Komatsu distributor. 4 - 4 OUTLINE OF SERVICE Alway s use Komatsu genuine parts for replacement parts , grease When changing t he oi l or adding oil , do not mix different ty pes of oil . When changing the type of oil, drain all the old oil and f ill completely with the ne w oil. Always replace the f ilter at the s ame time.
(There is no problem if the small amount of oil remaining in the piping mixes with the new oil.) Unless otherwise specified, when th e machine is shipped f rom the f actory, it is filled with the oil and coolant listed in the table Item Type Engine oil pan Engine oil EO15W40DH (Komatsu genuine parts) Damper case Power train oil TO30 (Komatsu genuine parts) Jaw crusher motor bearing case Final drive case Grizzly feeder vibrator case Hydraulic oil system Power train oil TO10 (Komatsu genuine parts) Radiator Supercoolant AF-NAC (density: 30% or above) (Komatsu genuine parts)