Komatsu — CHECK, CLEAN AND REPLACE AIR CLEANER ELEMENT

. MAINTENANCE SERVICE PROCEDURE outer element in lock cover (3) with 4 - 27 REPLACING INNER ELEMEN 1. First remove the outer element, and then remov e the inner element 2. Cover the air connect or side (outlet side) with a clean cloth or tape. 3. Clean the air cleaner body i nterior, then r emove the cover from the air intake port in 4. Install the new inner e lemen t to the body, then t ighten the nut. Do not clean the inner element and use it again NOTICE The inner element must not be used agai n even afte r cleani ng. When replacing the outer element, replace the inn er element at the same 5. Set th hooks (2). osition, then