4in1 BUCKET q Wear thick gloves and safety goggles during this check. q To check the system for leaks, use a piece of cardboard or a wooden board. 5 - Lower the bucket to the ground, stop the machine, lubricate the joints (See "4.5.2 LUBRICATION DIAGRAM (4in1 bucket and pallet forks)") and check the hydraulic oil level (see "4.8.6.a CHECKING THE HYDRAULIC OIL LEVEL"). IMPORTANT q Before starting work make sure that the bucket position indicator is correctly set (see "3.12.1 BUCKET POSITION INDICATOR"). 6.3.4 USING THE 4in1 BUCKET The 4in1 bucket can be used for the following applications: 1 - Loading (dumping the bucket as described in "3.12.2.1 LOADING HEAPED AND LEVEL MATERIAL").
2 - Unloading on high surfaces by opening the bucket instead of overturning it (vertical unloading). 3 - Handling logs, branches, etc. with the grapple function (opening and closing), by using the teeth provided on the mobile jaw (4) to grasp them. 4 4 - Flushing and levelling (with open bucket). RWA34520 IMPORTANT q To flush the ground, open the bucket and move the machine forward working with the fixed part of the bucket. q To level the ground, open the bucket and move the machine backward working with the mobile part of the bucket. The operator can check the opening of the bucket at any moment, by means of the indicator (10).
6.3.5 MAINTENANCE The 4in1 bucket does not require special maintenance operations in addition to those required for the standard bucket, except for the lubrication, as described at point "4.5.2 LUBRICATION DIAGRAM (4in1 bucket and pallet forks)". 251 WARNING