Komatsu — 6.4.3 USING THE FORKS

PALLET FORKS 6.4.2 SAFETY DEVICES Two safety pins (3) are provided to keep the forks in overturned position when the machine travels on roads and during work: A 4 4 FOR TRAVEL ON ROADS (Only for machines with approval for travel on roads): make the forks slide towards the centre of the bucket, overturn them and insert them in the supports (5) as shown in Figure A. It is also compulsory to install the locks as described in paragraph "3.1 SAFETY LOCKS". 5 3 5 3 DURING WORK: make the forks slide towards the outside of the bucket, overturn them and insert them in the supports (5) as shown in Fig. B.

RWA34560 B q During work, avoid keeping the forks as represented in Figure A, since they may make contact with the engine hood. 6.4.3 USING THE FORKS 4 5 q Before working with the forks, the operator must evaluate the increased dimensions of the machine and learn how to use the fork controls. q The forks protrude beyond the bucket outline and therefore it is necessary to be very careful when manoeuvring the machine, especially in reduced spaces. RWA39680 3 q After forking the material, before lifting the load, move the forks in such a way as to lift their prongs and therefore prevent the load from slipping.

q When the forks are overturned for use or storage, be careful to the grasping points, since hands and feet may be injured and even cut off. If possible, this operation should be carried out by two persons. q Use the lifting, oscillation and shifting controls slowly and smoothly, in order to avoid vibrations that may cause the load to move. q Maintain the greatest possible distance between the forks. q The forks must always rest on the blade and be positioned between two teeth, in order to prevent them from slipping laterally. RKA15500 253 CAUTION WARNING DANGER