BACKHOE TELESCOPIC ARM 6.5 BACKHOE TELESCOPIC ARM 6.5.1 DESCRIPTION AND CONTROL The telescopic arm makes it possible to work with the equipment installed at a variable distance that is greater than that allowed by the standard arm. When the telescopic arm is completely extended, the breakout force at the bucket pin is reduced and only lighter loads can be lifted; therefore, suitable buckets must be used (see "6.1 AUTHORIZED OPTIONAL EQUIPMENT"). This structure features an external hollow arm (1) inside which the arm (2) that supports the equipment slides on adjustable “V”- shaped guides.
The sliding of the arm is achieved by means of a double-acting cylinder controlled by an additional distributor. 1 2 RKA15530 6.5.1.1 CONTROL (version with mechanically- controlled backhoe) The distributor that manages the telescopic movement is controlled by means of a pedal (3) positioned on the right side of the backhoe control lever unit; the movements of the levers described in "3.3.6.1 pos. 19/20 - BACKHOE CONTROL LEVERS (version with mechanical controls)"remain unchanged.. The movements of the telescopic arm are as follows: 1 - Extension of the arm, obtained by pressing the pedal (3) with the toe. 2 - Retraction of the arm, obtained by pressing the pedal (3) with the heel.
6.5.1.2 CONTROL (version with servo-assisted backhoe) In the version with servo controls, the movement of the telescopic arm is achieved via the buttons (4) and (5) positioned on the right joystick lever. The movements of the main equipment remain unchanged; see "3.3.6.1 pos. 19/20 - BACKHOE CONTROL LEVERS (version with servo controls)". The movements of the telescopic arm are as follows: 1 - Retraction of the arm, obtained by pressing the push button (4); the arm stops when the button is released. 2 - Extension of the arm, obtained by pressing the push button (5); the arm stops when the button is released.
IMPORTANT q The telescopic arm controls are inhibited when the safety button (A) is in locking position (see "3.3.2 pos. 12 - SERVO CONTROL LOCKING BUTTON"). 256