Komatsu — 6.5.3 USING THE TELESCOPIC ARM

BACKHOE TELESCOPIC ARM 6.5.2 SAFETY DEVICES The telescopic arm is equipped with a safety element (6) that locks the sliding arm (2) when it is completely retracted and prevents any accidental extension of the same. The safety element (6), held in its seat by the retainer (7), must be inserted and prevent the extension of the arm as shown in Fig. A in the following situations: A 2 RWAB0470 7 6 1 - when it is necessary to travel on roads or in any case when the machine must cover considerable distances; 2 - when the backhoe is not used. In operating conditions, the safety element (6) must be positioned as shown in Fig. B.

B 2 RWAB0460 7 6 6.5.3 USING THE TELESCOPIC ARM q Before releasing and extending the arm, make sure that the stabilizers rest on firm ground. q If possible, work with the backhoe centered on the guides and unload the material as near the machine as possible. q If it is necessary to work with misaligned backhoe or with the backhoe completely shifted on the guides, operate slowly when swinging the arm to unload the material on the misaligned side, since in these conditions the machine may lose stability. q Do not use the arm retracting cylinder to increase the bucket tearing force when digging. For other possible applications, see "3.13 USING THE MACHINE AS AN EXCAVATOR". 257 WARNING