Komatsu — 6.6.1.2 CONTROL (version with servo-assisted backhoe)

CONFIGURATION FOR THE INSTALLATION OF THE DEMOLITION HAMMER 6.6 CONFIGURATION FOR THE INSTALLATION OF THE DEMOLITION HAMMER q The demolition hammer is very noisy, therefore always wear headphones when using it. IMPORTANT q For the characteristics, see table "6.1.3 CHARACTERISTICS OF THE OPTIONAL EQUIPMENT". 6.6.1 DESCRIPTION AND CONTROL The machine can be configured in such a way as to allow the installation of a demolition hammer on the backhoe; this hammer is operated by means of an additional distributor. 6.6.1.1 CONTROL (version with mechanically- controlled backhoe) The distributor is controlled by means of a pedal (1) positioned on the left side of the backhoe control lever unit.

The movements of the levers described at point "3.3.6.1 pos. 19/ 20 - BACKHOE CONTROL LEVERS (version with mechanical controls)". remain unchanged. The hammer is operated by pressing the pedal (1) with the toe, since in this way pressurized oil is conveyed into the circuit; when the pedal is released, the oil flow is interrupted and therefore the hammer stops. 6.6.1.2 CONTROL (version with servo-assisted backhoe) In the version with servo controls, the hammer is operated via the small pedal (5) positioned on the cab floor. The movements of the levers described at point "3.3.6.1 pos. 19/ 20 - BACKHOE CONTROL LEVERS (version with servo controls)" remain unchanged.

The hammer s operated by pressing the foot-operated button (5), since in this way pressurized oil is conveyed into the circuit; when the foot-operated button (5) is released, the oil flow is interrupted and therefore the hammer stops. IMPORTANT q The demolition arm control is inhibited when the safety button is in locking position (see "3.3.2 pos. 12 - SERVO CONTROL LOCKING BUTTON"). This configuration includes also the fixed installation of rigid or flexible pipes, more precisely a delivery (2) and a drain (3) pipe that convey/discharge the oil necessary for the operation of the hammer and reach the proximity of the hammer connection (4). 260 WARNING 3 2 3 2 4 RWA03680