Komatsu — 6.10.1 DESCRIPTION AND CONTROL

CONFIGURATION FOR THE USE OF THE HAND HYDRAULIC HAMMER 6.10 CONFIGURATION FOR THE USE OF THE HAND HYDRAULIC HAMMER q The hand hydraulic hammer is very noisy; always wear headphones when using it. q The hand hydraulic hammer transmits intense vibrations that may cause psychical and physical stress to the operator; be extremely careful especially at the end of work and have short rests when you feel that you are losing sensibility in the upper limbs. 6.10.1 DESCRIPTION AND CONTROL The machine can be provided with delivery (1) and return (2) couplings for the use of a hand hydraulic hammer; the connection to the machine is made up by two flexible pipes (3).

The hammer circuit is separated from the normal circuits of the machine by means of a solenoid valve controlled by a push button positioned on the side dashboard. The operation of the push button (4), which includes a connection warning light, energizes the solenoid valve that permits the flow of the oil necessary for the operation of the hammer; if the push button (4) is pressed a second time, the solenoid valve is deenergized and the oil flow is interrupted. For operation, the hammer is provided with a specific control. (See the specific operation manual). 276 WARNING