Chapter 11 TPD1317e 11.2 M225Ti, M215C and M185C Engines Page 70 Model M225Ti/M215C Model M185C Basic Technical Data Rated power 213 PS (156.6 kW) 190 PS (140 kW) Rated engine speed 2500 rev/min 2100 rev/min Number of cylinders 6 Cylinder arrangement In-line Cycle 4 stroke lnduction system Wastegated turbocharger with charge air cooler Bore 100 mm (3.937”) Stroke 127 mm (5.00”) Compression ratio 16:1 Cubic capacity 6.00 litres (365.0 in3) Valves per cylinder 2 Direction of rotation Anti-clockwise viewed on flywheel Firing order 1, 5, 3, 6, 2, 4 Total weight (wet) 609 kg (1342 lb) engine only including starter and alternator.
Cooling System The coolant shown below is mandatory for use in all climates to ensure that adequate levels of corrosion inhibitor are present. It will give frost protection to -37oC. Coolant 50% inhibited ethylene glycol or 50% inhibited propylene glycol with 50% fresh clean water Fresh water flow 205 l/min (45 galls/min) at 2500/min 159 l/min (35 galls/min) at 2100rev min Coolant pump speed and method of drive. 1:1 Gear driven System capacity 25.3 litres (5.6 gallons) Pressure cap setting 50 kPa (7 psi) Protection switch setting 96oC Sea water pump type Jabsco gear driven model 25.4 mm (1”) full cam. Sea water suggested inlet hose diameter. 32 mm (1.25”) Sea cock Full flow 25.4mm (1.00”)