TPD1317e Chapter 11 Page 71 Model M225Ti/M215C Model M185C Strainer A raw water strainer must be included in the suction side of the circuit. Maximum sea water temperature. 38oC (100oF) Sea water flow 123 l/min (27galls/min) 109 l/min (24galls/min) Fuel System Recommended fuel specifications. BS2869 Class A2 ASTM D 975 Number 2D. Fuel injection pump Bosch rotary with boost control and electric stop. (energised to stop). Fuel lift pump AC Delco type LU Fuel feed pressure (static) 0.3 to 0.6 bar (5 to 8 psi) Governor type Mechanical Pipe size:
• Supply - Outside diameter 7.9 mm (0.315”) • Supply - Bore 6.53 mm (0.257”) • Return - Outside diameter 6.3 mm (0.25”) • Return - Bore 4.93 mm (0.194”) Maximum lift pump lift 1.8 m (6 ft) to bottom of tank suction pipe. Maximum fuel lift pump depression at inlet. 127 mm (5”) Hg Fuel consumption at full power. 43 l/hr (9.4galls/hr) 35 l/hr (7.7galls/hr) Air Intake Combustion airflow 13.0 m3/min (460 ft3/min) 10.76 m3/min (380 ft3/min) Maximum engine compartment air temperature. 60oC Maximum air temperature at engine inlet. 52oC Ventilation - maximum engine room depression. 125mm WG (5”WG) Suggested ventilation airflow including combustion air.
25m3/min (1000ft3/min) Minimum cross section of air duct (per engine). 640 cm2 (100 sq ins) for hot climates. 320 cm2 (50 sq ins) for temperate climates.