Chapter 11 TPD1317e Page 74 Model M135 Model M130C Maximum sea water temperature. 38oC (100oF) Sea water flow 127 l/min (28galls/min) Fuel System Recommended fuel specifications. BS2869 Class A2 ASTM D 975 Number 2D. Fuel injection pump Stanadyne with electric stop. Fuel lift pump AC Delco type LU Fuel feed pressure (static) 33/55 kPa (5/8 psi) Governor type Mechanical Pipe size: • Supply - Outside diameter 7.9 mm (0.315”) • Supply - Bore 6.53 mm (0.257”) • Return - Outside diameter 6.3 mm (0.25”) • Return - Bore 4.93 mm (0.194”) Maximum lift pump lift 1.8 m (6 ft) to bottom of tank suction pipe. Maximum fuel lift pump depression at inlet. 127 mm (5”) Hg Fuel consumption at full power.
14.37 ml/sec Fuel consumption at full power 28 l/hr (6.2 galls/hr) Air Intake Combustion airflow 6.5 m3/min (230 ft3/min) Maximum engine compartment air temperature. 60oC (140oF) Maximum air temperature at engine inlet. 52oC (125oF) Ventilation - maximum engine room depression. 125mm WG (5”WG) Suggested ventilation airflow including combustion air. 13m3/min (520ft3/min) Minimum cross section of air duct (per engine). 320 cm2 (50 sq ins)