Komatsu — 3.3.8 Operation of work equipment

3.3 Operation Operation 3.3.8 Operation of work equipment ! When standing up from the operator's seat, always set the work equipment lock lever securely to the LOCK position. If the work equipment lock lever is not locked, and work equip- ment control lever (A) is touched by mistake, this may lead to serious personal injury. A 1 2 ! If the work equipment lock lever is not securely at the LOCK position, the work equipment may move and this may lead to serious personal injury. Always check that the condition is as shown in the diagram. Free Lock ! Never raise the boom with the bucket fully loaded when the machine is articulated. There is danger that the machine may tip over.

GK038007 3 Work equipment lock lever (3) is a lock device for work equip- ment control lever (A). REMARK This lever locks the hydraulic circuit for the work equipment elec- trically, so if it is in the LOCK position, the work equipment will not move even if work equipment control lever (A) is operated. Lift arm control lever (1) and bucket control lever (2) can be used to operate the lift arm and bucket as follows. 3-128 WA470-6H – VEAM946100 WARNING WARNING