4.9 Service procedure When required Maintenance 4.9.4 When required Clean, replace air cleaner element For inspection method, see "Check air cleaner element (3-96)". When the yellow piston of the dust indicator enters the red range (7.5 kPa) or the air cleaner clogging caution lamp of the machine monitor lights up, clean the air cleaner element. ! If inspection, cleaning, or maintenance is carried out with the engine running, dirt will get into the engine and damage it. Always stop the engine before carrying out these operations. ! When using compressed air, there is danger that dirt may be blown around and cause serious injury.
Always use safety glasses, dust mask, and other protective equipment. Cleaning outer element 1. Open the engine side cover on the right side of the machine. 1 2 2. Remove three clips (2), then remove cover (3). NOTE Never remove inner element (5). If it is removed, dust will enter and cause engine trouble. GK047015 5 3. Remove outer element (4). 4 GK032239 4-32 WA470-6H – VEAM946100 WARNING WARNING