4.9 Service procedure Maintenance When required Antifreeze is flammable, so keep it away from flame. Antifreeze is toxic. When removing the drain plug, be careful not to get water containing antifreeze on you. If it gets in your eyes, flush your eyes with large amount of fresh water and see a doc- tor at once. Use city water for the cooling water. If river water, well water or other such water supply must be used, contact your KOMATSU distributor. We recommend use of an antifreeze density gauge to control the mixing proportions. ! Prepare a container whose capacity is larger than the speci- fied coolant volume to catch drained coolant. ! Prepare a water inlet hose. 1.
Stop the engine and tighten 2 valves (1) of the corrosion resistor. 1 GK047028 2. Remove cover (2) at the upper of radiator, check that the cooling water temperature has gone down enough to make it possible to touch the radiator cap surface by hand, then turn radiator cap (3) slowly until it contacts the stopper to release the pressure. 2 3. Following this, push radiator cap (3), turn it until it contacts the stopper, then remove it. 3 GK047029 WA470-6H – VEAM946100 4-37 WARNING WARNING