CTM-7 (5-89) 2R3 ; 015 17 110589 AW1;R39504 R70; 070300 971 110589 AW1 ;R39505 R70; 070300 972 2901BB 3000 Series (HPR)-Hydraulic Pump 15-17 8. Inspect shoulder surface (A) of taper roller bearings. Replace if spacer wear exists. 9. Inspect fixed spacers (8). Replace if scored or discolored. 10. Inspect pump shaft journal (C). Replace if pitted, scored, or discolored. Pump Shaft Journal 00 . . ........... . .. . ...... 44.302-44.318 mm (1 . 7442-1.7448 in.) 11. Inspect thrust washers (A) for cracking or chipping. Inspection may require magnification. 12. Inspect spacers (8). Replace if scored or discolored. Race 10 .... ... .. . . ..... ....... .. . ... ... . .. .. 57 . 041-57 . 061 mm (2 .
2457-2 .2465 in.) Race 00 . .............. . ........... .. ... . ... 71 . 475-71 .525 mm (2 . 8140-2.8159 in.) 14. Inspect needle rollers (D). Replace ALL needle rollers if any are scratched, pitted or discolored. A-Thrust Washers B-5pacers C-Race D-Needle Rollers 13. Inspect race (C). Replace if scored or discolored. 6. Remove bearing cones using a bearing puller. 7. Disassemble pump shaft assembly. NEW PART SPECIFICATION NEW PART SPECIFICATION Litho in U.S.A. AllTractorManuals.com