John Deere Radial Piston Pumps (3000 Series) — John Deere Radial Piston Pumps (3000 Series) User Manual

CTM-7 (5-89) 2Rli 015 19 110589 AW1;RW1673 9 R70;070300 1202 150589 AW1;R37912,R39604 R70;070300 993 110589 3000 Series (HPR)-Hydraulic Pump Litho in U.S.A. 15-19 For "B" DRIVE COUPLER, perform Steps 7a, 7b, and 7c. 7b. Install coupler on end of shaft using an O-ring Seal Tool Set to compress snap ring (A) while pushing on coupler. 7c. Install new sealing ring (8) on coupler using procedure in Steps 8, 9, and 10. NOTE: Use optional JDG493 Shaft Seal Sizer Tool (A) to aid sealing ring installation. 8. Install JDG494 Spline Protector Tool (C) on pump shaft. 9. Carefully slide new sealing ring (8) over spline protector and down into groove on pump shaft making sure sealing ring does not twist.

Use optional JDG493 Sizing Tool (A) to aid installation. NOTE: Optional JDG493 Sizing Tool may be used in place of hose clamp. 10. Clamp sealing ring in groove using a hose clamp. Put shim stock between clamp and sealing ring to prevent sealing ring damage. Leave hose clamp in place approxi- mately five minutes to allow sealing ring to set. 7a. Install snap ring on pump shaft groove. AllTractorManuals.com