John Deere Radial Piston Pumps (3000 Series) — John Deere Radial Piston Pumps (3000 Series) User Manual

CTM·7 (5·89) AW1;T85262 R70;070300 1084 260489 AW1;T85284 R70;070300 369 260489 2fU; 010 16 110589 2000 Series (PRJ-Hydraulic Pump 1. Wipe discharge seats (B) with your finger accessing seat through the discharge valve bores. This should be done before inspection since oil on valve seat may give impres- sion of seat damage. 2. Visually inspect discharge valve seats (B) for peening or damage. IMPORTANT: Press fit is critical for sealing. DO NOT remove discharge valve seats unless re- placement is absolutely necessary. 3. Install special screw (A) into seat through piston bore and JDH39B-1 Installer and Removal Tool (A) through discharge valve bore. 4.

Install a slide hammer and adapter into the tool and remove seat. 5. Install new discharge valve seats (B) using JDH39B·1 Installer and Removal Tool (A). Drive seat into housing until flange of tool is against face of housing. Litho in U.S.A. 10·16 INSPECT, REMOVE AND INSTALL DISCHARGE VALVE SEATS AllTractorManuals.com