AW1;R3b313 R70;070300 1072 280188 AW1;R39945 R70;070300 1075 150589 CTM-7 (5-89) 2R3; 010 19 110589 2000 Series (PR)-Hydraulic Pump Litho in U.S.A. 10-18 DISASSEMBLE AND INSPECT PUMP SHAFT NOTE" Standard drive shaft for serialized single bank pump is shown. 1. Visually inspect taper bearing cones (A) for damaged cage or rollers. 2. Visually inspect spacers (8) and thrust washers (0) for wear or damage. 3. Inspect race (C) for nicks, scratches, pitting or metal discoloration. Replace race and pistons if external damage exists. 4. Hold pump shaft and slowly turn race (C). If assembly is sticking or noisy, replace all needle rollers between race and pump journal.
A-Bearing Cone B-Spacer C-Race D- Thrust Washer IMPORTANT: Be careful not to scratch or damage shaft surface (A). This could cause seal leakage. 5. Remove sealing ring using an O-Ring Seal Tool Kit. NOTE: Not all pump shafts will have a sealing ring. 6. Remove bearing cones using a bearing puller. AllTractorManuals.com