John Deere Radial Piston Pumps (3000 Series) — John Deere Radial Piston Pumps (3000 Series) User Manual

CTM-7 (5-89) 2R3j 010 20 110589 AW1;R39739. R39756, R39946 R70;070300 1078 150589 2000 Series (PR)-Hydraulic Pump 10·20 For DOUBLE BANK PUMP, perform Steps 7a, 8a, 9a, 10a, 11a, 12a, and 13a. NOTE: Shafts shown with one race disassembled. Both races should be disassembled and inspected. NOTE: Non-serialized 100 cm3 (6 in. 3) pump shaft assem- bly is shown in TOP photograph and shaft assembly for serialized pump is shown In MIDDLE photograph. NOTE: Spacer and thrust washer designs val}'. Early de- signed non-serialized 130 cm3 (8 in. 3) shafts using bronze thrust washers (see TOP photograph for single bank pump) should be updated to design shown in MIDDLE photograph. Kits are available. 8a.

Inspect bearing (A) shoulder surface. Replace if spacer wear exists. NOTE: Some serialized pumps use a double row of needle rollers with a spacer in between and on the ends of the rollers as shown in the BOTTOM photograph. 9a. Inspect spacers (8). Replace if worn, scored, or discolored. 10a. Inspect pump shaft journal (C). Replace if pitted, scored, or discolored. NOTE' VESPEL ® thrust washers on serialized pump (bot- tom photograph) may require magnification for inspection. 11 a. Inspect thrust washers (D). Replace if worn or damaged. NOTE: Refer to specifications for needle roller 00 and race 00 and 10. 13a. Inspect needle rollers (F).

Replace ALL needle rollers if any are scratched, pitted or discolored. A-Bearing B-Spacers c-Pump Shaft 0- Thrust Washers E-Race F-Needle Rollers 12a. Inspect race (E). Replace if scored or discolored. NOTE: Refer to specifications for shaft journal 00. 7a. Disassemble pump shaft. AllTractorManuals.com Litho in U.S.A.