Cummins — 4021330

Lubricating Oil and Filters C8.3 Industrial Page 6-4 Section 6 - Maintenance Procedures at 300 Hours or 1 Year Spin-on Type Shut off the engine. Use your hand to open the drain valve. Turn the valve counterclockwise approximately 3Ѕ turns until the valve drops down 25.4mm [1 in] and draining occurs. Drain the filter sump until clear fuel is visible. CAUTION When closing the drain valve, do not overtighten the valve. Overtightening can damage the threads. To close the valve, lift the valve and turn clockwise until it is hand-tight. Lubricating Oil and Filters Drain WARNING Some state and federal agencies have determined that used engine oil can be carcinogenic and cause reproductive toxicity.

Avoid inhalation of vapors, ingestion, and prolonged contact with used engine oil. If not reused, dispose of in accordance with local environmental regulations. PROTECT THE ENVIRONMENT: Handling and disposal of used lubricating engine oil is subject to federal, state, and local laws and regulations. Use authorized waste disposal facilities, including civic amenity sites and garages providing authorized facilities for receipt of used lubricating oil. If in doubt, contact your state and local environmental authorities or the Environmental Protection Agency for guidance as to proper handling and disposal of used lubricating engine oil. NOTE:

If the engine is in service, under no circumstances can the lubricating oil drain interval extend beyond the intervals given in the charts. Change the lubricating oil and filters to remove the contaminants suspended in the lubricating oil. NOTE: Drain the lubricating oil only when it is hot and the contaminants are in suspension.