Cummins — 4021330

Sea Water Pump C8.3 Industrial Page 6-16 Section 6 - Maintenance Procedures at 300 Hours or 1 Year Install If the impeller is in good shape and will be reused, install it in the same direction from which it was removed. Refer to the mark you made during removal. If the impeller was not marked and the original rotation or direction can not be determined, replace the impeller with a new one. An oil filter strap wrench or even plastic wire straps can be used as an installation aid to hold the vanes. Guide the impeller into the housing, twisting it counterclockwise as it is advanced so that the vanes will be deflected in the proper direction.

Continue to turn the impeller while pushing it into the housing. It will slide all the way in when the keyway lines up with the key. Insert the new o-ring into the impeller housing. Use a little silicone grease to hold it in place.