daewoo — Daewoo SB4136E00 Service Manual for G420E/G424E Tier LP Engine Lift Trucks

Table a.

MI-04 Diagnostic Fault Codes (Flash Codes) G420E/G424E Tier LP Engine Advanced Diagnostics 55 DFC Probable Fault Action Corrective Action, First Check 54 BatterySensorInputHigh Battery voltage measured above +15.9 VDC Stored Fault Code (MIL Only) Check battery and charging system voltage z Check battery voltage during starting and with the engine running z Check voltage regulator, alternator and charging system z Check battery and wiring for overheating and damage z Measure battery power at the SECM with a multimeter SECM PIN 13 (BATT +) to SECM PIN 14 (BATT -) 55 XDRPSensorInputLow +5VDC Transducer power supplied by the SECM to the sensors is below +4.60VDC (Expected faults when Transducer power is lost CODES:

22, 24, 33, 62, 64, 66, 68 & 69) Engine Shutdown Measure transducer power at the TMAP connector with a multimeter TMAP PIN 3 +5VDC to TMAP PIN 1 XDCR GND Verify transducer power at the SECM with a multimeter SECM PIN 18 +5VDC to SECM PIN 1 XDCR GND Verify transducer power at ETC with a multimeter ETC PIN 3 XDCR PWR to ETC PIN 2 XDCR GND Verify transducer power to the Acceleration Pedal with a multimeter