Fuel and Air Systems/Service CTM5 (20OCT92) 25-05-6 K Series Air Cooled Engine AllTractorManuals.com 220596 PN=151 SERVICE BREATHER NOTE: Tappet chamber cover is an oil breather. 1. Remove carburetor. (See this group.) -UN-02APR91 2. Remove tappet chamber cover/breather and gasket (A). 3. Clean cover/breather and tube. Inspect for cracks or damage. Replace if necessary. M80349 4. Install new gasket and cover/breather. 5. Install carburetor. MX,2505A1,A7 -19-21OCT92 25 05 6 SERVICE AIR CLEANER NOTE: Replace elements yearly or every 25 hours as required. 1. Remove and disassemble air cleaner. -UN-11MAR91 IMPORTANT: Do not clean elements with solvent or compressed air. 2.
Wash foam element (A) in detergent and water. Dry M80240 element. 3. Put 12—15 drops of engine oil on foam element (A). Squeeze out excess oil. A—Foam Element B—Paper Element 4. Replace paper element (B) if: C—Cover D—Base —Element is oily, dirty, bent, torn, crushed, or obstructed in any way. —Seal is damaged. —Engine performance is poor. 5. Inspect cover (C) and base (D) for damage. Replace if necessary. IMPORTANT: Any time air cleaner base is removed, check for free choke operation during reassembly. 6. Assemble and install air cleaner. MX,2505A1,A8 -19-21OCT92