John Deere K Series Air-Cooled Engines — INSPECT CRANKSHAFT BALL BEARINGS—FG150G

Cylinder Block, Valves and Internal Components/Crankshaft CTM5 (20OCT92) 25-20-16 K Series Air Cooled Engine AllTractorManuals.com 220596 PN=173 INSPECT CRANKSHAFT BALL BEARINGS—FG150G 1. Remove flywheel end oil seal. (See Inspect Oil Seals in this group.) -UN-29AUG88 2. Remove crankshaft bearing from cylinder block using a bearing, bushing and seal driver set. Remove bearing from crankcase cover using a blind hole puller set. M38073 3. Thoroughly clean bearings in solvent. Dip bearings in light weight oil. 4. Spin each bearing by hand and check for axial (A) and radial (B) free play. 5. Replace bearings if noisy or too much play. 6.

Install bearings flush to inside of crankcase cover or cylinder block using a bearing, bushing and seal driver set. 7. Install oil seal. MX,2520A1,A25 -19-21OCT92 25 20 16