Cylinder Block, Valves and Internal Components/Cylinder Block NOTE: A bare block is available for service. 5. Measure cylinder bore parallel with crankshaft and right angles to crankshaft at top and bottom of ring travel. 6. If cylinder bore exceeds wear limit, replace cylinder block or rebore cylinder. (See this group.) M51745 -UN-23FEB89 M80385 -UN-02APR91 NOTE: If cylinder is rebored, oversize piston and rings must be installed. 7. Install crankshaft. CYLINDER BORE SPECIFICATIONS Standard . . . . . . . . . . . . . . . . . 63.98—64.00 mm (2.521—2.522 in.) Wear Limit . . . . . . . . . . . . . . . . . . . . . . . . . . 64.05 mm (2.524 in.) Out-of-Round (Max) . . . . . . . . . . . . . . . . .
. . 0.045 mm (0.0018 in.) 25 20 19 MX,2520A1,A30 -19-21OCT92 CTM5 (20OCT92) 25-20-19 K Series Air Cooled Engine AllTractorManuals.com 220596 PN=176