Cylinder Block and Internal Components/Inspect 4. Align arrow match mark (A) on piston head with MADE IN JAPAN (B) on connecting rod. 5. Install piston pin and circlip. M80179 -UN-11FEB91 MX,3020A1,A10 -19-21OCT92 6. Inspect piston for scoring or fractures. Replace piston if damaged. NOTE: Inspect clearance visually. Replace piston if clearance appears excessive. M38102 -UN-29AUG88 7. Check ring grooves for wear at several points around piston. Replace piston if clearance is greater than specification.
CLEARANCE SPECIFICATION (MAX) Top Ring Second Ring Oil Control Ring 0.10 mm 0.10 mm 0.10 mm (0.004 in.) (0.004 in.) (0.004 in.) CTM5 (20OCT92) 30-20-6 K Series Air Cooled Engine MX,3020A1,A12 -19-21OCT92 AllTractorManuals.com 220596 PN=211 INSPECT PISTON 1. Analyze piston and piston ring wear. (See Section 100, Group 10.) 2. Remove piston rings. (See this group.) -UN-06SEP88 IMPORTANT: Do not use a caustic cleaning solution or a wire brush to clean piston. 3. Remove all deposits from the piston. M29946 4. Clean carbon from piston ring grooves with a ring groove cleaner (A). If cleaning tool is not available, break an old ring and use it carefully to clean groove. 5.
Check that oil return passages in grooves are open. MX,3020A1,A11 -19-21OCT92 30 20 6