John Deere K Series Air-Cooled Engines — INSPECT PISTON

Cylinder Block and Internal Components/Inspect 10. Measure piston O.D. (A) perpendicular to piston pin bore. 11. Measure cylinder bore. (See Inspect Block in this group.) 12. Subtract piston O.D. measurement (A) from cylinder bore measurement to determine piston-to-cylinder bore clearance. M80181 -UN-11FEB91 13. Replace piston and/or rebore cylinder block if not within specifications. (See this group.) SPECIFICATIONS Piston O.D. (A) . . . . . . . . . . . . . . . . . . . . . . . 64.90 mm (2.555 in.) Piston-to-Cylinder Bore Clearance Standard . . . . . . . . . . . . . . . . 0.06—0.10 mm (0.0024—0.0039 in.) Wear Limit . . . . . . . . . . . . . . . . . . . . . . . .

0.1375 mm (0.0054 i MX,3020A1,A14 -19-21OCT92 CTM5 (20OCT92) 30-20-7 K Series Air Cooled Engine AllTractorManuals.com 220596 PN=212 8. Measure piston pin outer diameter. Replace if less than specification. 9. Measure piston pin bore. Replace piston if measurement is greater than specification. -UN-31AUG88 SPECIFICATIONS Piston Pin O.D. Piston Bore I.D. (MIN) (MAX) M50064 14.98 mm 15.05 mm (0.590 in.) (0.593 in.) -UN-11FEB91 M80180 MX,3020A1,A13 -19-21OCT92 30 20 7