John Deere K Series Air-Cooled Engines — INSPECT CRANKSHAFT PLAIN BEARING

Cylinder Block and Internal Components/Crankshaft INSPECT CRANKSHAFT PLAIN BEARING 1. Remove crankshaft. (See this group.) 2. Measure crankshaft bearing in crankcase cover. Replace cover if diameter is greater than specifications. (See this group.) M80184 -UN-11FEB91 3. Install crankshaft. SPECIFICATIONS Bearing I.D. (Max) . . . . . . . . . . . . . . . . . . . . . 25.10 mm (0.988 in.) MX,3020A1,A19A -19-21OCT92 CTM5 (20OCT92) 30-20-10 K Series Air Cooled Engine AllTractorManuals.com 220596 PN=215 NOTE: An undersized connecting rod is available through the parts catalog, if necessary. 8. Connecting rod journal (A) can be resized to accept under-sized rod.

Have grinding done by a reliable repair shop. Before sending crankshaft for grinding, inspect -UN-29AUG88 journal radii (B) for cracks. 9. Cover keyway on flywheel end of crankshaft with tape to prevent seal damage when installing crankshaft. M38036 10. Put a light film of oil on crankshaft bearing surfaces. 11. Pack grease in oil seals and install crankshaft. 12. Install piston and connecting rod. 13. Install camshaft. MX,3020A1,A19 -19-21OCT92 30 20 10