Cylinder Block, Valves and Internal Components/Piston and Connecting Rod REMOVE AND INSTALL PISTON AND CONNECTING ROD 1. Remove cylinder head. (See Group 15.) 2. Remove crankcase cover. (See this group.) M80466 -UN-17MAY91 3. Remove carbon and varnish from top of cylinder bore with a ridge reamer. 4. Bend open locking tabs (B). 5. Remove cap screws, lock plate (D), oil splasher (A) and connecting rod cap (C). A—Oil Splasher B—Locking Tabs 6. Push piston and connecting rod from cylinder bore. C—Connecting Rod Cap D—Lock Plate 7. Make repairs as necessary.
(See procedures in this group.) MX,3520A1,A17 -19-21OCT92 35 20 10 CTM5 (20OCT92) 35-20-10 K Series Air Cooled Engine AllTractorManuals.com 220596 PN=255