John Deere K Series Air-Cooled Engines — INSPECT PISTON

Cylinder Block, Valves and Internal Components/Inspect Piston 4. Align the R on the piston head with the Japanese characters (A) on the connecting rod. 5. Install piston pin and circlip. M80469 -UN-17MAY91 MX,3520A1,A20 -19-21OCT92 6. Inspect piston for scoring or fractures. Replace piston if damaged. NOTE: Inspect clearance visually. Replace piston if clearance appears excessive. M38102 -UN-29AUG88 7. Check ring grooves for wear at several points around piston. Replace piston if clearance is greater than specification.

CLEARANCE SPECIFICATION (MAX) Top Ring Second Ring Oil Control Ring 0.15 mm 0.15 mm 0.15 mm (0.006 in.) (0.006 in.) (0.006 in.) CTM5 (20OCT92) 35-20-12 K Series Air Cooled Engine MX,3520A1,A22 -19-21OCT92 AllTractorManuals.com 220596 PN=257 INSPECT PISTON 1. Analyze piston and piston ring wear. (See Section 100, Group 10.) 2. Remove piston rings. (See this group.) -UN-06SEP88 IMPORTANT: Do not use a caustic cleaning solution or a wire brush to clean piston. 3. Remove all deposits from the piston. M29946 4. Clean carbon from piston ring grooves with a ring groove cleaner (A). If cleaning tool is not available, break an old ring and use it carefully to clean groove. 5.

Check that oil return passages in grooves are open. MX,3520A1,A21 -19-21OCT92 35 20 12