John Deere K Series Air-Cooled Engines — INSPECT PISTON

Cylinder Block, Valves and Internal Components/Inspect Piston 8. Measure piston pin outer diameter. Replace if less than specification. 9. Measure piston pin bore. Replace piston if measurement is greater than specification. SPECIFICATIONS M50064 -UN-31AUG88 M80470 -UN-17MAY91 Piston Pin O.D. Piston Bore I.D. (MIN) (MAX) 20.98 mm 21.03 mm (0.827 in.) (0.829 in.) MX,3520A1,A23 -19-21OCT92 CTM5 (20OCT92) 35-20-13 K Series Air Cooled Engine AllTractorManuals.com 220596 PN=258 10. Measure piston O.D. (A) perpendicular to piston pin bore. 11. Measure cylinder bore. (See Inspect Block in this group.) -UN-17MAY91 12. Subtract piston O.D.

measurement (A) from cylinder bore measurement to determine piston-to-cylinder bore clearance. 13. Replace piston and/or rebore cylinder block if not M80471 within specifications. (See this group.) SPECIFICATIONS Piston O.D. (A) . . . . . . . . . . . . . 79.77—79.79 mm (3.140—3.141 in.) Piston-to-Cylinder Bore Clearance . . . . . . . . . . 0.195—0.235 mm (0.0077—0.009 in.) MX,3520A1,A24 -19-21OCT92 35 20 13