Cylinder Block and Internal Components/Inspect 6. Inspect piston for scoring or fractures. Replace piston if damaged. NOTE: Inspect clearance visually. Replace piston if clearance appears excessive. 7. Check ring grooves for wear at several points around piston. Replace piston if clearance is greater than specification. M38102 -UN-29AUG88 CLEARANCE SPECIFICATION (MAX) Top Ring Second Ring Oil Control Ring FC290V 0.16 mm 0.14 mm 0.19 mm (0.006 in.) (0.005 in.) (0.007 in.) FC400V/ FC420V/ 0.17 mm 0.15 mm 0.20 mm FC540V (0.007 in.) (0.006 in.) (0.008 in.) MX,4020A1,A20 -19-21OCT92 CTM5 (20OCT92) 40-20-13 K Series Air Cooled Engine AllTractorManuals.com 220596 PN=324 8.
Measure piston pin outer diameter. Replace if less than specification. 9. Measure piston pin bore. Replace piston if measurement is greater than specification. -UN-31AUG88 SPECIFICATIONS Piston Pin O.D. Piston Bore I.D. (MIN) (MAX) M50064 FC290V 18.98 mm 19.03 mm (0.747 in.) (0.749 in.) FC400V/ FC420V/ 21.98 mm 22.04 mm FC540V (0.865 in.) (0.868 in.) -UN-31AUG88 M50065 MX,4020A1,A21 -19-21OCT92 40 20 13