John Deere K Series Air-Cooled Engines — INSPECT CONNECTING ROD

Cylinder Block and Internal Components/Inspect 10. Measure piston O.D. (A) perpendicular to piston pin bore. 11. Measure cylinder bore. (See Inspect Block in this group.) 12. Subtract piston O.D. measurement (A) from cylinder bore measurement to determine piston-to-cylinder bore clearance. M80398 -UN-06APR91 13. Replace piston and/or rebore cylinder block if not within specifications. (See this group.) SPECIFICATIONS Piston O.D. (A) FC290V . . . . . . . . . . . . . . 77.85—77.87 mm (3.0649—3.0657 in.) FC400V . . . . . . . . . . . . . 86.83—86.864 mm (3.4185—3.4192 in.) FC420V . . . . . . . . . . . . . . . 88.83—88.85 mm (3.4885—3.498 in.) FC540V . . . . . . . . . . . . .

88.83—88.864 mm (3.4885—3.4984 in.) Piston-to-Cylinder Bore Clearance FC290V . . . . . . . . . . . . . . . . . . . . . . . . . 0.142 mm (0.0056 in.) FC400V . . . . . . . . . . . . . . . . 0.13—0.151 mm (0.005—0.0059 in.) FC420V . . . . . . . . . . . . . . . . 0.13—0.151 mm (0.005—0.0059 in.) FC540V . . . . . . . . . . . . . . 0.110—0.151 mm (0.0043—0.0059 in.) MX,4020A1,A21A -19-21OCT92 CTM5 (20OCT92) 40-20-14 K Series Air Cooled Engine AllTractorManuals.com 220596 PN=325 INSPECT CONNECTING ROD 1. Clean and inspect rod. Replace if scored. 2. Analyze crankshaft and connecting rod wear. (See Section 100, Group 10.) -UN-31AUG88 3. Install connecting rod cap. Tighten to 20 N·m (177 lb-in.). 4.

Measure connecting rod crankshaft bearing and piston M50066 bearing (A). Replace connecting rod if either measurement is greater than specifications. BEARING I.D. SPECIFICATIONS (MAX) Crankshaft Piston Bearing Bearing FC290V 35.57 mm 19.06 mm (1.400 in.) (0.750 in.) FC400V/ FC420V/ 41.07 mm 22.06 mm FC540V (1.617 in.) (0.868 in.) MX,4020A1,A22 -19-21OCT92 40 20 14