John Deere K Series Air-Cooled Engines — INSPECT PISTON

Cylinder Block and Internal Components/Inspect Piston 4. Align arrow match mark (A) on piston head opposite MADE IN JAPAN (B) on connecting rod. 5. Install piston pin and circlip. M80426 -UN-25APR91 MX,4520A1,A15 -19-21OCT92 INSPECT PISTON 1. Analyze piston and piston ring wear. (See Section 100, Group 10.) 2. Remove piston rings. (See this group.) M29946 -UN-06SEP88 IMPORTANT: Do not use a caustic cleaning solution or a wire brush to clean piston. 3. Remove all deposits from the piston. 4. Clean carbon from piston ring grooves with a ring groove cleaner (A). If cleaning tool is not available, break an old ring and use it carefully to clean groove. 5.

Check that oil return passages in grooves are open. MX,4520A1,A16 -19-21OCT92 CTM5 (20OCT92) 45-20-10 K Series Air Cooled Engine AllTractorManuals.com 220596 PN=391 6. Inspect piston for scoring or fractures. Replace piston if damaged. NOTE: Inspect clearance visually. Replace piston if clearance appears excessive. -UN-29AUG88 7. Check ring grooves for wear at several points around piston. Replace piston if clearance is greater than specification. CLEARANCE SPECIFICATION (MAX) M38102 Top Ring Second Ring Oil Control Ring 0.16 mm 0.14 mm — (0.006 in.) (0.005 in.) MX,4520A1,A17 -19-21OCT92 45 20 10