John Deere K Series Air-Cooled Engines — INSPECT PISTON

Cylinder Block and Internal Components/Inspect Piston 8. Measure piston pin outer diameter. Replace if less than specification. 9. Measure piston pin bore. Replace piston if measurement is greater than specification. SPECIFICATIONS M50064 -UN-31AUG88 M80427 -UN-25APR91 Piston Pin O.D. Piston Bore I.D. (MIN) (MAX) 18.98 mm 19.03 mm (0.747 in.) (0.749 in.) MX,4520A1,A18 -19-21OCT92 CTM5 (20OCT92) 45-20-11 K Series Air Cooled Engine AllTractorManuals.com 220596 PN=392 10. Measure piston O.D. (A) perpendicular to piston pin bore. 11. Measure cylinder bore. (See Inspect Block in this group.) -UN-25APR91 12. Subtract piston O.D.

measurement (A) from cylinder bore measurement to determine piston-to-cylinder bore clearance. 13. Replace piston and/or rebore cylinder block if not M80428 within specifications. (See this group.) SPECIFICATIONS Piston O.D. (A) . . . . . . . . . . . 77.85—77.87 mm (3.0649—3.0657 in.) Piston-to-Cylinder Bore Clearance . . . . . . . . . . 0.051—0.089 mm (0.002—0.0035 in.) MX,4520A1,A18A -19-21OCT92 45 20 11