John Deere K Series Air-Cooled Engines — REMOVE, INSPECT AND INSTALL CRANKSHAFT

Cylinder Block and Internal Components/Crankshaft CTM5 (20OCT92) 45-20-14 K Series Air Cooled Engine AllTractorManuals.com 220596 PN=395 REMOVE, INSPECT AND INSTALL CRANKSHAFT 1. Remove camshaft. (See this group.) 2. Remove piston and connecting rod. (See this group.) -UN-09JAN91 3. Remove balancer. (See this group.) 4. Remove crankshaft. M54495 IMPORTANT: A bent crankshaft must be replaced; it cannot be straightened. 5. Check crankshaft alignment (T.I.R.). (See this group.) 6. Clean and inspect crankshaft. Replace if parts are scratched or damaged. 7. Analyze crankshaft and connecting rod wear. (See Section 100, Group 10.) 8.

Measure crankshaft main bearing journals and connecting rod journal. Replace crankshaft if measurements are less than specifications. JOURNAL SPECIFICATIONS (MIN) Main Bearing Journal Connecting PTO Side Flywheel Rod Journal Side 29.92 mm — 35.43 mm (1.178 in.) (1.395 in.) MX,4520A1,A22 -19-21OCT92 45 20 14