Cylinder Block and Internal Components/Crankshaft NOTE: An under-sized connecting rod is available through the parts catalog, if necessary. 9. Connecting rod journal (A) can be resized to accept under-sized rod. Have grinding done by a reliable repair shop. Before sending crankshaft for grinding, inspect journal radii (B) for cracks. M38036 -UN-29AUG88 10. Cover keyway on flywheel end of crankshaft with tape to prevent seal damage when installing crankshaft. 11. Put a light film of oil on crankshaft bearing surfaces. 12. Pack grease in oil seals and install crankshaft. 13. Install balancer assembly on crankshaft. 14. Install crankshaft. 15. Install piston and connecting rod. 16.
Install camshaft. MX,4520A1,A23 -19-21OCT92 CTM5 (20OCT92) 45-20-15 K Series Air Cooled Engine AllTractorManuals.com 220596 PN=396 INSPECT CRANKSHAFT PLAIN BEARING 1. Remove crankshaft. (See this group.) 2. Measure crankshaft bearing in crankcase. Replace crankcase, if diameter is greater than specifications. (See -UN-25APR91 this group.) 3. Install crankshaft. SPECIFICATIONS M80431 Bearing I.D. (MAX) . . . . . . . . . . . . . . . . . . . . 30.08 mm (1.184 in.) MX,4520A1,A24 -19-21OCT92 45 20 15