Cylinder Block and Internal Components/Crankshaft ADJUST CRANKSHAFT END PLAY 1. With gasket (A) installed on crankcase, measure from gasket surface to crankshaft gear surface (B). Record measurement (C). 2. Measure from crankcase cover mounting face (D) to PTO bearing end (E). Record measurement (F). M51545 -UN-31AUG88 M80434 -19-25APR91 3. Locate measurements on appropriate table. Follow lines to where recorded measurements intersect. Choose the next smaller shim from the table. 4. Install shim on PTO shaft. 5. Install crankcase cover.
(See this group.) A—Gasket B—Crank Gear Surface C—Measurement D—Crankcase Cover Mounting Face E—PTO Bearing End F—Measurement MX,4520A1,A28 -19-21OCT92 45 20 17 CTM5 (20OCT92) 45-20-17 K Series Air Cooled Engine AllTractorManuals.com 220596 PN=398