Starting Systems/Electric Starter TEST SOLENOID NOTE: If bench test indicated solenoid problems, use an ohmmeter or test light to check solenoid. 1. Test solenoid terminals (A and B) for continuity. There should be no continuity. M51705 -UN-31AUG88 2. Depress switch arm (C). There should be continuity when arm is fully depressed. 3. Test for open circuits between terminal (B) and tang (D). There should be continuity. 4. Test for open circuits between tang (D) and body (E). A—Terminal B—Terminal There should be continuity. C—Switch Arm D—Tang If solenoid fails any test, it is defective and must be E—Solenoid Body replaced.
MX,4530A1,A6 -19-21OCT92 CTM5 (20OCT92) 45-30-5 K Series Air Cooled Engine AllTractorManuals.com 220596 PN=412 CHECK STARTER ARMATURE ROTATION 1. Remove starter. 2. Rotate armature (A). -UN-18APR90 If armature does not rotate freely, armature may be bent or bearings may be worn. Disassemble, inspect and clean starter. (See this group.) M53972 MX,4530A1,A7 -19-21OCT92 45 30 5