John Deere K Series Air-Cooled Engines — REPLACE CRANKSHAFT BEARING SHELL

Cylinder Block, Valves and Internal Components/Crankshaft REPLACE CRANKSHAFT BEARING SHELL 1. Drive old bearing (A) from crankcase using an appropriate bushing tool (B) and an arbor press. 2. Align new bearing so arrow head formed by oil grooves (C) points opposite to engine rotation (D). Align oil hole (E) in bearing with oil passage (F) in crankcase. M51527 -UN-31AUG88 M51526 -UN-31AUG88 3. Install new bearing to depth (G) 1 mm (0.039 in.) below flange surface.

A—Bearing B—Bushing Tool C—Oil Grooves D—Engine Rotation E—Oil Hole F—Oil Passage G—Installation Depth MX,2020A1,A26 -19-21OCT92 CTM5 (20OCT92) 20-20-16 K Series Air Cooled Engine AllTractorManuals.com 220596 PN=77 INSPECT CRANKSHAFT PLAIN BEARING NOTE: Cylinder block is fitted with a replaceable bearing shell. 1. Remove crankshaft. (See this group.) -UN-11MAR91 2. Measure crankshaft bearing in cylinder block. Replace shell, if diameter is greater than specifications. (See this group.) M80263 3. Install crankshaft. BEARING I.D. SPECIFICATIONS (MAX) FA130D . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22.10 mm (0.869 in.) FA210D . . . . . . . . . . . . . . . . . . . . . . . . . . .

. 25.10 mm (0.988 in.) MX,2020A1,A25 -19-21OCT92 20 20 16