John Deere K Series Air-Cooled Engines — CHECK LOW OIL LEVEL SENSOR—FA130D-AN00

Cylinder Block, Valves and Internal Components/Check Low Oil Level Sensor CHECK LOW OIL LEVEL SENSOR—FA130D-AN00 1. Remove crankcase cover. (See this group.) 2. Remove screws (A) and float cover (B). TY15052 -UN-02SEP88 MX,2020A1,A35 -19-21OCT92 3. Connect multimeter test leads to low oil sensor lead (A) and case (B). Set multimeter selector switch to Rx1 ohm position. Slide float (C) to top of shaft. Multimeter should indicate infinite resistance. TY15053 -UN-02SEP88 CTM5 (20OCT92) 20-20-20 K Series Air Cooled Engine M98,2045A,A11 -19-21OCT92 AllTractorManuals.com 220596 PN=81 INSPECT AND REPLACE OIL SPLASHER 1. Remove camshaft. (See this group.) 2. Bend open locking tab (A). -UN-11MAR91 3.

Remove cap screw (B). 4. Remove oil splasher (C). 5. Inspect splasher for wear or damage. Replace if M80268 necessary. 6. Install splasher and cap screw. Tighten cap screw to specifications. 7. Bend locking tab over cap screw. 8. Install camshaft. TORQUE SPECIFICATIONS Cap Screws FA130D . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 N·m (106 lb-in.) FA210D . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 N·m (168 lb-in.) MX,2020A1,A34 -19-21OCT92 20 20 20