Connecting rod TCD 2013 2V W 06-01-02 Checking internal diameter of the con rod bearing shells ●Remove screws. ●Remove the con rod bearing cover. Make sure the clamping bushings (1) are in place. 1 6 © 44440-0 ●Insert bearing shell in the con rod. Attention! Note the assignment of the bearing shells. The anti-rotation lock (1) must lock in groove (2). 2 1 © 44215-0 ●Insert bearing shell in the respective big end bearing cap. Attention! Note the assignment of the bearing shells. The anti-rotation lock (1) must lock in groove (2). 1 2 © 44216-0 © 02/2010 OBJ_DOKU-21762-001.fm 5/8