Technical data ID no.
Name P02 73 Piston, diameter, standard P02 75 Piston protrusion P02 76 Piston protrusion P02 77 Piston protrusion P02 78 Piston bolt, bore P02 84 Joint clearance, piston ring 1 P02 85 Joint clearance, piston ring 2 P02 86 Joint clearance, piston ring 3 P02 88 Axial clearance, 2nd ring (taper-faced ring) P02 89 Axial clearance, 3rd ring , (bevelland-edge oil control ring) P03 31 Cylinder bore, inside diameter P03 35 Fit depth of collar rest and sealing surface for cy - linder liner P03 36 Cylinder liners, collar height P03 39 Cylinder liner, overhang P02 87 Axial clearance, 1st ring (double-sided keystone ring) 4 Cylinder liners Piston rings Crankcase © 02/2010 OBJ_DOKU-21741-001.fm 6/18 ID no.
Name Information Series Value Unit P02 73 Piston, diameter, standard Measuring point 3 = height 97 mm TCD 2013 2V 107,660 mm P02 75 Piston protrusion 1 hole, cylinder head gasket, 1.42 mm TCD 2013 2V 0,28 - mm P02 76 Piston protrusion 2 hole, cylinder head gasket, 1.52 mm TCD 2013 2V 0,54 - mm P02 77 Piston protrusion 3 hole, cylinder head gasket, 1.62 mm TCD 2013 2V 0,64 - 0,75 mm P02 78 Piston bolt, bore TCD 2013 2V 42+0,017 +0,01 mm Piston rings P02 84 Joint clearance, piston ring 1 Identification (TOP) in direction of combustion chamber TCD 2013 2V 0,3 - 0,55 mm P02 85 Joint clearance, piston ring 2 Identification (TOP) in direction of combustion chamber TCD 2013 2V 1,5 - 2,0 mm P02 86 Joint clearance, piston ring 3 Identification (TOP) in direction of combustion chamber TCD 2013 2V 0,3 - 0,6 mm P02 87 Axial clearance, 1st ring (double-sided keystone ring) Wear limit TCD 2013 2V Measure with trapezo- idal groove wear gauge - P02 88 Axial clearance, 2nd ring (taper-faced ring) TCD 2013 2V 0,09 - 0,13 mm P02 89 Axial clearance, 3rd ring , (bevelland-edge oil control ring) TCD 2013 2V 0,03 - 0,075 mm Crankcase Cylinder liners P03 31 Cylinder bore, inside diameter Standard TCD 2013 2V 108+0,02 mm P03 35 Fit depth of collar rest and sealing surface for cy- linder liner TCD 2013 2V 8,92+0,03 mm P03 36 Cylinder liners, collar height TCD 2013 2V 9 -0,02 mm P03 39 Cylinder liner, overhang TCD 2013 2V max.
0.080 mm at least 0.030 mm