Technical data ID no. Name Information P04 31 Camshaft bearing pin diameter Standard P05 91 Gap dimension speed governor (crankshaft) P08 44 Length of compression spring for the oil pressure control valve P09 11 Coolant thermostat start of opening P09 13 Coolant thermostat stroke P12 11 Tension of the V-belt (generator/coolant pump) First assembly P12 21 Tension of the V-belt (generator/coolant pump) Check after 15 minutes running under load Lubricating oil system Other components Engine control Cooling system Camshaft © 02/2010 OBJ_DOKU-21741-001.fm 7/18 ID no.
Name Information Series Value Unit Engine control Camshaft P04 31 Camshaft bearing pin diameter Standard TCD 2013 2V 64,2+0,2 -0,2 mm P05 91 Gap dimension speed governor (crankshaft) TCD 2013 2V 0,6+0,1 -0,1 mm Lubricating oil system P08 44 Length of compression spring for the oil pressure control valve TCD 2013 2V 62 mm Cooling system P09 11 Coolant thermostat start of opening TCD 2013 2V 83 ℃ mm P09 13 Coolant thermostat stroke TCD 2013 2V at least 8 mm Other components P12 11 Tension of the V-belt (generator/coolant pump) First assembly TCD 2013 2V 650 N P12 21 Tension of the V-belt (generator/coolant pump) Check after 15 minutes running under load TCD 2013 2V 400+50 -50 N