Technical data A07 001 Clamping claw injector on cylinder head A07 031 High pressure pump to crankcase ID no.
Name A07 038 Rail to cylinder head A06 020 Turbocharger on exhaust pipe A06 022 Pin bolt on exhaust pipe A06 030 Charge air pipe on cylinder head A06 042 Heating flange on charge air manifold A06 046 Charge air manifold on charge air pipe A07 024 Fuel supply pump on holder A07 032 Control block to crankcase A07 034 Fuel line to high pressure pump A07 035 Fuel line to control block A07 038 Rail to cylinder head A06 042 Heating flange on charge air manifold A07 003 Injection lines on rail and pressure pipe nozzle High pressure pipe at high pressure pump 4 A07 003 Injection lines on rail and pressure pipe nozzle High pressure pipe at high pressure pump © 02/2010 OBJ_DOKU-21741-001.fm 14/18 ID no.
Name Screw type Notes / Remarks Series Pre-tensio- ning value Post- clamping value A06 020 Turbocharger on exhaust pipe Nut M10 Insert with DEUTZ S1 moun- ting compound TCD 2013 2V 42 Nm A06 022 Pin bolt on exhaust pipe Insert with DEUTZ S1 moun- ting compound TCD 2013 2V 10 Nm A06 030 Charge air pipe on cylinder head TCD 2013 2V 11 Nm A06 042 Heating flange on charge air manifold M8x100-10.9 Stage 1: TCD 2013 2V 3 Nm A06 042 Heating flange on charge air manifold M8x100-10.9 Stage 2: TCD 2013 2V 30° A06 046 Charge air manifold on charge air pipe TCD 2013 2V 30 Nm A07 001 Clamping claw injector on cylinder head Observe order of assembly. Install injector without tension.
TCD 2013 2V hand tight 27 Nm A07 003 Injection lines on rail and pressure pipe nozzle High pressure pipe at high pressure pump Union nut Stage 1: Observe assembly specifica- tion. Use new pipe. TCD 2013 2V 10 Nm A07 003 Injection lines on rail and pressure pipe nozzle High pressure pipe at high pressure pump Union nut Stage 2:
TCD 2013 2V 60° +15° A07 024 Fuel supply pump on holder TCD 2013 2V 20 Nm A07 031 High pressure pump to crankcase M10x30-10.9 Screws oiled TCD 2013 2V 10 Nm 50 Nm A07 032 Control block to crankcase M8x75 M8x85 Observe tightening sequence TCD 2013 2V 20 Nm A07 034 Fuel line to high pressure pump TCD 2013 2V 26 Nm A07 035 Fuel line to control block TCD 2013 2V 34 Nm A07 038 Rail to cylinder head Stage 1: Observe assembly specifica- tion. TCD 2013 2V hand tight A07 038 Rail to cylinder head Stage 2: TCD 2013 2V 30 Nm